- Maximum workpiece thickness 60 mm
- Edge thickness in rolls max 3 mm
- Top pressure system with rubber belt
- Feed speed max 22 m/min
- Spraying unit (Anti-sticking liquid)
- Pre-milling
- Glue pod unit
- Edge Pressure unit 1 + 4 rollers
- End cutting unit
- Fine trimming unit
- 2 motors round unit
- Edge Scraping Unit
- Glue scraper unit
- Milling unit
- Brush unit
- CE standards

- Panel length: 200 - 3200 mm
- Panel width: 35 - 1250 mm
- Panel thickness: 8 - 60 mm
- Worktop with counter-pressure system
- Pliers with thickness measurement system
- laser-based reading system for detecting the parameters/reference points and the plate end
- Compensation of length tolerances through plate dimensions in X
- Tool changer with 8 positions
- HSK F63 electrospindle with 6.5 kW with 8-position tool changer complete with fourth axis.HSK F63 with 6.5 kW
- Double drilling head with 44 tool
-Software: bSolid

- Working area 3.640 x 1.530 mm
- Working thickness 250 mm
- N. 1 E/spindle 5 Axis HSK
- 14 position chain tool change
- N. 13 vertical spindles
- N. 2 opposed horizontal spindles in X
- N. 2 opposed horizontal spindles in Y
- N. 8 rails, 24 pods
- System to help heavy panels load
- motorized chip evacuation system
- Vacuum Pump
- Biesse-works
- CE standards.

• Working area 3220 x 1800
• Flat table 1600 x 1800
• Z passage 300 mm
• Axes stroke X 4300 Y 1800
• 2 E/Spindles da 11 KW a 10.500 rpm HSK 63 F
• 2 10 positions Revolver tool change
• 1 250 mc/h vacuum pump
• 2 BH 19 Drilling units
• Osai Numerical control
• CE Mark

- Useful cutting width 4500 mm
- Useful cutting length 4300 mm
- Maximum protrusion of the main blade 90 mm
- Motorized pushing carriage with 10 gripper
- Carriage with blade and scoring unit
- Main blade - max. tool diameter 350 mm - motor power 7.5 KW
- Scoring blade - max. tool diameter 160 mm - motor power 1.5 KW
- Fixed front table with additional guide
- 3 Front table
- CE mark

• Electronic touch screen control. Easypro 3000;
• Sanding belt width / development: 2,620 x 1,350 mm;
• Useful working width: 1,350 mm;
• 1st Group: Roller of 250 mm 45 Sh. 20 Hp with inverter;
• 2nd Group: Roller of 340 mm 30 Sh. 20 Hp with inverter;
• 3rd Group: Superfinishing machine with 46-sector 20 Hp pad;
• Oscillating polisher diameter 200 mm 2.2 Hp;
• Rotating blowers for panel cleaning.;
• Oscillating blowers for belt cleaning;
• Double grooved rubberized pressure rollers;
• 3 infeed and outfeed panel support rollers;
• Vacuum hob with 10 Hp electric fan;
• Regulation of depression according to absorption;
• Advancement of the belt with 5.5 Hp inverter 3.5-20 m/min;
• Rear driving roller covered in rubber;
• CE regulations

VIDEO

- Workable panel thickness: 10 to 60 mm
- Edge thickness in coils (min/max) mm 0,4 - 3 mm
- Edge thickness in strips (solid wood) 20 mm
- Running driving chain speed adjustable up to 25 mt/min
- Infeed guide CN Positioning
- Pre-milling unit
- Hot melt glue pot ultra grano press
- CN position Roller set to press the edge
- End cutting with 2 motors
- Rough trimming unit
- CN Position Rounder Corner 4 motors
- CN Position Edge scraping Unit
- Glue scraping unit
- Brushing unit
- CN Position Milling shaping unit
- CE mark

- Useful cutting dimensions: 4500x4500 mm
- Blade projection: 100 mm
- N. 9 pneumatic clamps
- Scoring group 2,2 Kw
- Main motor 7,5 Kw
- 1 Fixed air blowing table with reference guide
- 2 Adjustable air blowing tables
- CE Mark

Second-hand Edgebander Biesse Akron 1440
- Workable panel thickness 10 - 60 mm
- Edge thickness in rolls max 3 mm
- Feed speed 12/18 mt / min
- Lateral support with idle wheels
- Upper belt presser
- Manual feeder for narrow pieces
- Top with veil
- Automatic track lubrication
- ADZ02 anti-adhesive group
- Infrared lamp
- AX-1, numerically controlled axis on infeed guide.
- NC Z axis for edge guide device.
- Adjustments
- Tekno glue gluing unit
- Pre-melter for Eva glue
- Double gluing system for PU glue
- Reverse system
- Edge pressure roller conveyor
- AX-1, numerically controlled axis on edge pressure roller conveyor.
- Cooling-antistatic liquid applicator device
- Header
- Gleaner
- AX-4, numerically controlled axes on gluing unit.
- Rounder with 2 motors
- AX-2, numerically controlled axes on Rounding Unit.
- Applicator group for glides
- Edge scraper
- AX-4, numerically controlled axes on Edge Scraper Group.
- Glue scraper with Kit for delicate panels
- Hair dryer
- Brush group
- CE Mark